Sanyo Katana LX - Manual (Page 36)

Saving a Phone Number
Your phone can store up to 300 Contacts entries.
Contacts can store up to a total of 500 phone numbers,
and each Contacts entry’s name can contain up to 64
characters. Your phone automatically sorts the Contacts
entries alphabetically. (For more information, see
“Contacts” on page 63.)
1. Enter a phone number and press Options (right
softkey) > Save .
2. Select New Entry or Existing Entry and press .
3. If New Entry was selected, select a phone type, and
then use the keypad to enter the new entry name
and press
.
– or –
If Existing Entry was selected, select an existing entry
to which you want to save the number, and then
select a phone type and press
.
4. Press Done (left softkey).
Finding a Phone Number
You can search Contacts entries for phone numbers that
contain a specific string of numbers.
1. Enter the last three or more digits of the number in
standby mode. (The more numbers you enter, the
more specific the search becomes.)
2. All Contacts entries matching the entered numbers
will be displayed. Highlight the entry and press
to dial the number.
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use
with automated systems, such as voicemail or credit
card billing numbers.
There are two types of pauses available on your phone:
ⅷ Hard Pause sends the next set of numbers when you
press .
ⅷ 2-Sec. Pause automatically sends the next set of
numbers after two seconds.
Note You can have multiple pauses in a phone number
and combine two-second and hard pauses.
24 Section 2A. Phone Basics