Sunwave Tech. SRC-7000 User Manual

Page 70

SRC-7000 User’s Manual

5. There are two choices in “Upgrade type”, “All (Reset to factory

default)” and “Pre-programmed code”

If you select “All (Reset to factory default)”, you will
upgrade your pre-programmed code database and erase all

your settings on the SRC-7000 simultaneously.

If you select “Pre-programmed code”, you will upgrade your
pre-programmed code database and keep your settings on

the SRC-7000.

6. After selecting the “Update type”, click the “Upgrade” button to start

the updating process.

7. You will see “OK” message after completion.