7 pre-programmed code – Sunwave Tech. SRC-7000 User Manual

Page 37

Chapter 3 How to Set Up Your SRC-7000

3.7 Pre-programmed Code

SRC-7000 is equipped with a large pre-programmed code database.

With this function, you are able to load the code for your device. It also

enables you to control your device even if you lose your original remote.

1. 2. 3.

1. Press the

button for 2 seconds to enter Setup Menu. And

then enter “Code Setting” menu.

2. Choose the “

Pre-code” item and then you will enter the submenu.

On tapping the soft key, you will see the indication for the function.
After reading the tips, please press the

button to go to next

step.

3. Select the required device to load the remote codes.

Choose the first letter of targeted device brand (ex. “S” on

behalf of Sony, Samsung…etc), and point the SRC-7000 at the

targeted device. After selecting “Brand” item, please turn on

your target device.