Sunwave Tech. SRC-7000 User Manual

Page 41

Text mode
Original mode

Chapter 3 How to Set Up Your SRC-7000

Learning successfully

Learning fail

6. 7.

6. Press the corresponding key on your original remote for about 2-3

seconds until the symbol

shows up on the LCD to make sure the

SRC-7000 has learnt the code.

7. If the symbol

shows up, it means that the SRC-7000 has failed

to learn the remote codes. If the SRC-7000 fails to copy the remote

code, please repeat this step again.

8. Press the

button when you have finished learning all keys.

9. If you intend to use the function to learn another device code, please

repeat step 3~8.

The preset layout for your device may not match your
original remote completely. Please use “Add Key” (P.
27), “Re-label” (P.30) or “Delete” (P. 33) functions to
adjust the layout.