Sunwave Tech. SRC-7000 - Manual (Page 42)

SRC-7000 User’s Manual
40
3.9 Learn a Cycle Key
Some devices save a circle of commands in one button. The SRC-7000
is equipped with a special Cycle function; with this function you are able
to replicate the circle of commands.
1. 2. 3.
1. Press the button for 2 seconds to enter the Setup Menu, and
then enter the “Code Setting” menu.
2. Choose the “ Cycle” item and then press the button to
enter the submenu.
3. Choose the device where you want to put the Cycle key.
4. 5. 6.
4. Choose one of the keys (except Device key) you will use as a Cycle
key.
5. Point your original remote at the “Learning Eye”, located at the
bottom of the SRC-7000, then press the corresponding key on your
original remote for about 2-3 seconds until the symbol shows up
on the LCD. Repeat this step till the SRC-7000 learns all codes in