Sunwave Tech. SRC-7000 - Manual (Page 46)

SRC-7000 User’s Manual
44
An Example of setting a Macro
„ Basic device operation for watch DVD:
1. Turn the TV on.
2. Switch the TV to video mode.
3. Turn the DVD on.
4. Create a two-second delay.
5. Instruct the DVD to play a disc.
„ The commands for the Macro key.
1. Press the TV device button.
2. Press the Power button.
3. Press the TV/Video button.
4. Press the DVD device button.
5. Press the Power button.
6. Press the Time Delay icon.
7. Press the Up and Down arrows to select a time delay.
8. Press
to confirm time delay.
9. Press the Play button.
10. Press
to save Macro
11. Press the button till it return back to the Main Menu.
The correlation between Basic Device Operation and commands for the Macro
key is shown below:
The Basic Device
Operation
The Required Macro Sequence
Turn the TV on.
1. Press for about 2 seconds, select “Code
Setting”, press , select “Macro”, press
two times to goes to the Menu.
2. Press the TV device key, select as Macro start key.
3. Press the TV Power key.
Switch the TV to video mode. 4. Press the TV/Video key.
Turn the DVD on.
5. Press the DVD device key.
6. Press the Power key
Create a two-second delay.
7. Press the Time Delay icon.
8. Press the Up and Down arrows to select a time delay.
9. Press
to confirm time delay.
Instruct the DVD to play a disc 10. Press the DVD Play key.
Completion
11. Press to save the Macro key
12. Press the button till it return back to main Menu.