Sunwave Tech. SRC-7000 - Manual (Page 43)

Chapter 3 How to Set Up Your SRC-7000
41
this Cycle key. (You can save up to 6 cycle commands in the Cycle
key.)
6. Press the button when you have finished learning all the
circle of commands.
7. If you intend to setup another “Cycle key”, please repeat step 4~6.
When you have saved some commands in a Cycle
key, a sign will be marked on the Cycle key.
3.10 Delete Device / Key Codes
With this function, you can delete the “Codes” in the keys.
1. 2. 3.
1. Press the button for 2 seconds to enter the Setup Menu, and
then enter the “Code Setting” menu.
2. Choose the “ Del. Code” item and then enter the submenu. On
pressing the soft key, you will see the direction for the function. After
reading the tips, press the
button to go to the next step.
3. Select the device you want to delete.
4. 5.