Sunwave Tech. SRC-7000 - Manual (Page 61)

Chapter 4 Menus
59
4.5 Duplicate
Duplicate
You can connect two SRC-7000s with the Transmit
Cable (Appendix B P.71) to duplicate the settings on
one remote and transfer them to another unit.
With this function, you are able to transfer your settings to another
SRC-7000 using the Transmit Cable.
1. Connect two SRC-7000s, “A” and “B”, by using the Transmit
Cable.
2. If you intend to transfer the settings on the SRC-7000 unit “A” to
unit “B”, use the SRC-7000 unit “A” to start the duplication.
3. 4. 5.
3. Press the button with unit “A” for 2 seconds to enter the
“Setup Menu”, and then select and enter “ Duplicate”.
4. On pressing the key, you will see a message to confirm
the transfer. If you decide to duplicate these settings, please tap
“Yes” then the duplication will start.
5. A message will appear to show the progress of the data
transmission and duplication.