Sunwave Tech. SRC-7000 User Manual

Page 48

SRC-7000 User’s Manual

4. Select any key in devices for the commands to use for the

Macro. You can save up to 60 commands in one Macro.

5. Select the operation processes between any devices.
6. Select the commands to use.

a. You can press the icon to set up the delay between two commands

from 0 ~30 seconds.

b. You can press the icon to go back to the former command you

selected.

Press the

button to confirm the Macro processes setting.

7. Then decide if you will set a Timer for the Timer Macro.

If you select “No”, you can confirm and exit the Macro setup

commands. You can repeat the steps 3-5 to set more Timer

Macros.

8. If you select “Yes”,

You can press the

soft key to set the delay time, which

is achieved by pressing the

and

buttons to set the

hour, or press the

and

buttons to change the items.

Tap the date

Or choose the weekday to set the activation time for the

Macro function; the section you choose will be in black.

9. Press the

button to confirm the settings for the Timer

Macro.

10. If you intend to setup another Timer Macro, please repeat 3~9.

If a Timer Macro has been set, a small mark will be shown
beside the Macro key

If the Macro has been set, this symbol will been shown

next to the Macro key.

If the Timer has been set, this symbol will been shown

next to the Macro key.