Sanyo C4272R S/C - Manual (Page 88)

88
SC
1
ON
Weekly timer input switches
System controller operation can be set when weekly timer
activates (ON/OFF).
SW2
In case of Remote control mode, use or .
In case of ZONE 1, 2, 3, 4 mode, ALL, all indoor units means
one of ZONE 1, 2, 3, 4.
*
1 : 1 (Central control 1) means ON/OFF operation cannot
be executed by remote controller.
* 2 : 2 (Central control 2) means ON/OFF, MODE change.
Temp. setting cannot be executed by remote controller.
All OFF
All indoor units to
be 1*
1
All OFF and all
indoor units to be
1*
1
All indoor units to
be 2*
2
All OFF and all
indoor units to be
2*
2
All OFF
No change
Individual control
of all indoor units
to be permitted
Same as above
Same as above
Same as above
All ON
Timer OFF →ON Timer ON →OFF
System controller operation
Switch No.
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
1 3 2
Auxiliary switch
Must be set to OFF position.
Beep tone switch
OFF: Beep tone when each button is pushed.
ON: No tone when each button is pushed.
Indication switch
Normally set to OFF position.
When set to ON position, indication is not displayed on LCD
of system controller.
*All switches are in OFF position at shipment.
OFF
2 3 4
SW2
5 6 7 8
1
2
3
4
5
6
1 2
07-115 SSHP_II 5/7/07 4:00 PM Page 88