Sanyo C4272R S/C - Manual (Page 48)

48
T
(5) Before suspending the indoor unit, remove the 2
screws on the latch of the air-intake grilles, open
the grilles, and remove them by pushing the claws
of the hinges as shown in Fig. 3-78. Then remove
both side panels sliding them along the unit toward
the front after removing the two screws which fix
them. (Fig. 3-79)
(6) Preparation for suspending the indoor unit. The
suspension method varies depending on whether
the unit is next to the ceiling or not.
(Figs. 3-80 and 3-81)
e
di
l
S
Hinge
Air-intake grille
Pull out the
air-Intake grille
pushing claws
of the hinges
Screw
Latch
Fig. 3-78
Slide toward
front side
Side panel
Fig. 3-79
unit
Suspension bolt
(field supply)
Ceiling surface
Washer (supplied)
Double nut
(field supply)
Fixture
Fig. 3-80
unit
Suspension bolt
(field supply)
Washer (supplied)
Washer (field supply)
Double nut
(field supply)
Fig. 3-81
07-115 SSHP_II 5/7/07 4:00 PM Page 48