Sharp FO-4650 - Manual (Page 94)

Polling
92
System and ID numbers are 4-digit numbers which provide you with
an alternate means of giving and receiving polling permission when
you don’t want to use fax numbers. The steps for programming these
numbers are described in the following pages.
Note: System and ID numbers can only be used if the other fax machine
is also a Sharp machine.
Turning Polling Security on and off
Polling Security is turned on or off with Option Setting 8. This
procedure is explained in Chapter 6, Optional Settings.
Storing and clearing fax numbers for polling permission
You can store up to 10 fax numbers in your fax’s list of permitted
numbers.
1
Press these keys:
The display will show:
2
Press 1 to set a number, or 2 to clear a
number..
3
Storing: Enter a 2-digit number
(from 01 to 10).This number
identifies the fax number you will
enter in the next step.
Clearing: Enter the 2-digit number
which identifies the fax number you
want to clear, and go to Step 5.
2:PASSCODE # MODE
1=SET, 2=CLEAR
(Example)
0 1
or
SET CLEAR
1 2
FUNCTION
3 2
all-FO4700.book Page 92 Tuesday, November 28, 2000 2:07 PM