Sharp FO-4650 - Manual (Page 165)

The Housing
163
8. Maintenanc
e
The Housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
Do not use benzene or thinner. These solvents may damage or
discolor the machine.
Replacing the Verification Stamp
If you are using the Verification Stamp function, you will need to
replace the ink cartridge in the stamp unit when it runs out of ink
(when the stamped mark on original documents becomes faint). A
new ink cartridge can be obtained from your dealer.
1
Remove the original document OUT
tray.
2
Press down on the protruding tab of
the green ink cartridge and pull the
cartridge out with your fingers.
all-FO4700.book Page 163 Tuesday, November 28, 2000 2:07 PM