Sharp FO-4650 - Manual (Page 54)

Sending a Fax by Automatic Dialing
52
3
Check the display. If the name or
number shown is correct, press the
START key. (If not, press the STOP
key and then repeat Step 2.)
Direct Keypad Dialing
You can also enter a full number with the number keys and then press
the START key to begin dialing.
1
Load the document(s). (Note: If
desired, you can load the document
after dialing in Step 2, below.)
SEND READY will appear in the
display.
• Set the resolution and/or contrast if
desired.
• To send the document ahead of
other documents waiting for
transmission, press the PRIORITY
key.
• To send the document directly from
the feeder (not through memory),
press the DOCUMENT key.
RESOLUTION
Q
CONTRAST
DOCUMENT
PRIORITY
START
all-FO4700.book Page 52 Tuesday, November 28, 2000 2:07 PM