Sharp FO-4650 - Manual (Page 45)

Programming Auto-Dial Numbers
43
2. Sendi
ng
Doc
u
ments
4
To program a Rapid Key number,
press a Rapid Key (to select Rapid
Keys 33 through 48, flip up the Rapid
Key overlay).
To program a Speed Dial number,
press the SPEED DIAL key and then
enter a number from “1” to “75” on
the FO-4650, or “1” to “100” on the
FO-4970. (If you enter less than two
digits on the FO-4650, or three digits
on the FO-4970, press the START
key to complete the entry.)
Example: Rapid Key 02
or
Speed Dial 1
5
Enter the fax number by pressing the
numeric keys (max. of 34 digits
including pauses).
• To clear a mistake, press the
CLEAR key.
• If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key (two seconds per
pause). The pause will appear as a
hyphen. Several pauses can be
entered in a row.
6
Press the START key.
(Example)
1
SPEED DIAL
B
02
3 2 1 4 4 1 1
START
START
all-FO4700.book Page 43 Tuesday, November 28, 2000 2:07 PM