Sharp FO-4650 - Manual (Page 154)

Optional Settings
152
Setting 29: VERIFICATION STAMP
Press 1 if you want the fax machine to stamp each original document
page as it is scanned. After scanning, you can check to see if all pages
have been stamped to verify that no double feeds occurred. Press 2 to
turn the function off.
Note: To use this function, your dealer must install the Verification
Stamp option.
♦ Initial setting: 2
Setting 30: PRINT HOLD
Press 1 if you want the fax machine to hold received documents in
memory instead of immediately printing them out (note that you must
first enter a Print Hold passcode as explained in Print Hold in Chapter
5). To turn off the Print Hold function, press 2, enter the 4-digit Print
Hold passcode, and then press START.
♦ Initial setting: 2
Setting 31: Not used.
Setting 32: COPY RESOLUTION
Use this setting to select the default copying resolution (the resolution
used for copying if a setting is not made with the RESOLUTION
key). Press 1 (S-FINE) to set the default resolution to SUPER FINE,
or 2 to set it to FINE.
♦ Initial setting: 2
all-FO4700.book Page 152 Tuesday, November 28, 2000 2:07 PM