Additional vga source controls, Vga source information commands, Vga source control commands – Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 User Manual
Page 63

47 |
CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Additional VGA Source Controls
Your VGA source supports all the general source controls described on page 45, as
well as the commands listed in this section. These settings are unavailable when the
projector is off, or when the VGA sources are disconnected.
NOTE
Some of these commands are invalid with composite video sources.
VGA Source Information Commands
These commands inform you of the current VGA source settings.
VGA Source Control Commands
These commands control the appearance of your VGA source. These settings are
unavailable when the projector is off, or when the VGA source is disconnected. See
page 42
for setting absolute and adjustment commands.
Command
Response
get frequency
frequency=[current frequency setting]
get tracking
tracking=[current tracking setting]
get saturation
saturation=[current saturation setting]
get tint
tint=[current tint setting]
get sharpness
sharpness=[current sharpness setting]
Command
Command Target Range
Response
set frequency [value]
=-5 to =5
frequency=[value]
set tracking [value]
=0 to =63
tracking=[value]
set saturation [value]
=0 to =100
saturation=[value]
set tint [value]
=0 to =100
tint=[value]
set sharpness [value]
=0 to =31
sharpness=[value]