Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 21)

5 | CHAPTER 1 – ABOUT YOUR INTERACTIVE WHITEBOARD SYSTEM
Extended Control Panel (ECP)
Your system’s fully-labeled ECP attaches
elegantly to your interactive whiteboard’s
bottom frame. The ECP features controls
for power, source selection and volume
adjustment, as well as an integrated USB
hub that enables you to switch seamlessly
between two connected computers.
Connection receptacles for your source inputs include:
• One USB A receptacle on the front of the ECP for USB storage devices
• Two USB A receptacles behind the interactive whiteboard
• Two RCA jacks on the front of the ECP for dual-channel audio input
• One RCA jack on the front of the ECP for composite video input
• One captive USB B receptacle for your primary computer
• One DB15M receptacle behind the interactive whiteboard for analog video input
• One USB B receptacle behind the interactive whiteboard for connecting a
secondary computer
• One RJ11 6-wire jack behind the interactive whiteboard for product control
Included Accessories
The following accessories are included with your SMART Board 600i4 or D600i4
interactive whiteboard system.
Remote Control
The remote control enables you to control the system and set up your
SMART UF65 or SMART UF65w projector. Use the remote control to
access menu options, system information and input selection options.
Pens
The pens have rubberized grip areas and are colored to
match four colors of digital ink: black, red, green and blue.
You can use dry-erase markers to replace the included
pens, as long as they’re a similar shape, don’t scratch or
mark your interactive whiteboard’s surface and reflect infrared light. If the substitute
doesn’t reflect infrared light, the pen tray sensors might not detect the presence of
the pen.