Specifications – Sony SNC-CS20 User Manual
Page 93

Ot
her
s
Specifications
93
3)
sysName=
Set the case of “mib-2.system.sysName.0” in the
4)
enaAuthTraps=
Set the case value of “mib-2.snmp.snmp
EnableAuthenTraps.0” in the
Type “1” (enable) or “2” (disable) in the
position.
5) community=
Set the community attributes.
setting identification number (1 to 8)
name to be set, and
the IP address of the host you allow access (0.0.0.0
for any host).
Example: To allow reading by any host in the “private”
community and having the ID number “2”.
community=2,r,private,0.0.0.0
6)
trap=
Set the attributes send traps to.
setting identification number (1 to 8),
name to send traps to, and
describes the IP address of the host to send traps to.
Example: To specify the destination of traps as the
public community and the ID number “1”.
trap=1,public,192.168.0.101
7)
delcommunity=
This parameter is used to delete the previous
community setting.
setting identification number (1 to 8).
8)
deltrap=
This parameter is used to delete the previous setting
of the host to send traps to.
setting identification number (1 to 8).
When you have finished changing the SNMP setting
information using the above parameters 1) to 8), check
the changed settings using an inquiry commands. If the
changed settings are OK, restart the SNMP using the
following CGI command.
SNMP restart command
GET, POST
Specifications
Network
Protocol
TCP/IP, ARP, ICMP, HTTP,
FTP(server/client), SMTP (client),
DHCP (client), DNS (client), NTP
(client), SNMP (MIB-2), RTP/
RTCP
Compression
Video compression format
JPEG/MPEG4
Audio compression format
G.711/G.726 (40, 32, 24, 16 kbps)
Image size
SNC-DM110 / DM160 / CM120
JPEG only:
1280 × 960 (Quad-VGA)
960 Ч 720
768 Ч 576
JPEG / MPEG4:
640 × 480 (VGA)
384 Ч 288
320 Ч 240 (QVGA)
SNC-DS10 / DS60 / CS20
JPEG only:
768 × 576
JPEG / MPEG4:
640 × 480 (VGA)
384 Ч 288
320 Ч 240 (QVGA)
Maximum frame rate
30 fps
Maximum user access
10 users
Network security
Password (basic authentication)
IP filtering
Homepage customization
Homepage starts up in the built-in flash
memory.
Other functions
Motion detection
SolidPTZ (SNC-DM110 / DM160 /
CM120 only)
Light funnel (SNC-DM110 / DM160 /
CM120 only)