Sony SNC-CS20 - Manual (Page 8)

Pre
par
at
ion
Assigning the IP Address to the Camera
8
If “Setting OK” is displayed, the IP address is
correctly assigned.
12
To access the camera directly, double-click the
camera name in the list.
Tips
• The factory setting of the camera network is as
follows.
IP address: 192.168.0.100
Subnet mask: 255.0.0.0
• When you select the camera in the network tab
and right-click Copy, and the camera’s MAC
address, DHCP/FIXED
*
, IP address, Port
number, Model name, Serial number and
Version number can be copied in the clipboard.
When you hold down Ctrl and press a, you can
select all cameras in the network tab.
* DHCP stands for a DHCP setting. FIXED
stands for a fixed IP address.
The welcome page of the network camera is
displayed on the Web browser.
Display sample: SNC-DM160
Note
If the IP address is not set correctly, the welcome page
does not appear after step 12. In that case, try to set the
IP address again.
When using Windows XP Service
Pack 2
Installing software
A warning message regarding the active contents may
appear when you install software such as IP Setup
Program from CD-ROM. In this case, operate as
follows:
Example: In case of IP Setup Program
If message “Internet Explorer” appears, click Yes.
If message “File Download – Security Warning”
appears, click Run.
Note
If you select Save in the “File Download – Security
Warning” dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.