Sony SNC-CS20 - Manual (Page 74)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Alarm Buffer — Alarm buffer Menu
74
Setting the Alarm Buffer
— Alarm buffer Menu
When you click in the Administrator menu,
the Alarm buffer menu appears.
You can set the Pre-alarm image and audio (the image
and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm
sending of FTP client menu or Alarm recording of
Image memory menu is set to On, besides when Use
alarm buffer is selected.
Codec
Select the video codec to be used for the alarm buffer.
Note
When you change the codec, the camera is rebooted.
Recording capacity
Displays the maximum recording capacity of the alarm
buffer in the present camera setting of the cordec, image
size, bit rate and frame rate.
Recording time
Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre-alarm duration: Type the recording duration of the
image/audio before alarm detection.
Post-alarm duration: Type the recording duration of
the image/audio after alarm detection.
Note
The value of Recording capacity differs depending on
the image size and image quality settings in the Camera
menu.
OK/Cancel
See “Buttons common to every menu” on page 28.