Sony SNC-CS20 - Manual (Page 15)

Pre
par
at
ion
Basic Configuration by the Administrator
15
Basic Configuration by
the Administrator
You can monitor the camera image by logging in with
the initial conditions set for this network camera. You
can also set various functions according to the installing
position, network conditions or purpose of the camera.
We recommend you configure the following items
before monitoring images from the camera.
Setting contents Setting menu
Synchronize the date and time of the camera with those of the computer. Date & time Tab (page 32)
Prepare a full image. (SNC-DM110 / DM160 / CM120 only) Capture full image (page 34)
Select whether to use the audio input. Audio input (page 35)
Select the white balance mode according to the installing position (surrounding
light). White balance (page 36)
Set the brightness of the image sent from the camera. Exposure (page 36)
Set the format and size of the image sent from the camera. Video codec Tab (page 40)
Select the quality of the image sent from the camera. Video codec Tab (page 40)
Set the user access right for the camera. User Menu (page 54)
Set a place to be watched beforehand. (SNC-DM110 / DM160 / CM120 only) Preset position Menu (page 56)
Make the setting for sending the monitor image attached to an e-mail. e-Mail (SMTP) Menu (page 59)