Sony SNC-CS20 - Manual (Page 66)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
66
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address of the recipient of a warning
mail (e-mail address of the camera Administrator),
using up to 64 characters.
OK/Cancel
See “Buttons common to every menu” on page 28.
Alarm recording Tab — Setting the
Image memory function when
detecting the alarm
You can set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in motion detection function.
Alarm recording
Select On to record the image and audio file in the built-
in memory linked with alarm detection.
Image file name
Type the file name you want to assign to the images to
be recorded. You can use up to 10 alphanumeric
characters, - (hyphen) and _ (underscore) for naming.
Suffix
Select a suffix to be added to the file name.
Date & time: The Date & time suffix is added to the
image file name.
The Date & time suffix consists of lower two-digits
of the year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus adding a 14-
digit number to the image file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the image
file name.
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of the
multiple files created with consecutive alarm events.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the alarm to be linked with the recording of image
and audio files.
Sensor input: The external sensor that is connected to
sensor input of the camera I/O port.
Motion detection: The alarm by the motion detection
function.
Click Detection, and the Motion detection menu is
displayed to allow you to set the motion detection
function (page 75).
Note
In the case that the synchronized preset position is
specified in Position at alarm in the Preset position
menu, the alarm event that happens when the camera
moves to the preset position will be invalid.
Effective period
Set the period during which alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule Menu” on page 73)
Alarm buffer
Select Use alarm buffer when you record the image/
audio of before and after alarm detection (pre-alarm,
post-alarm).
If you do not select the alarm buffer, only the image at
the moment of the alarm detection is recorded.
Click Alarm buffer to display the Alarm buffer menu.
For details, see “Setting the Alarm Buffer — Alarm
buffer Menu” on page 74.
OK/Cancel
See “Buttons common to every menu” on page 28.