Samsung digital SC-D363 - Manual (Page 76)

ENGLISH
72 72
Digital Still Camera Mode (SC-D363/D364/D365/D366 only)
Setting the File Number
✤ File Number setting works only in mode. ➥page 19
✤ File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
✤ File numbers may be set as follows:
- : When there are existing files, the new image will be named as the next number in the sequence.
- : When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [MEMORY].
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select , then press the [OK] button.
5. Move the [Zoom] lever up or down to select , then press the [OK] button.
6. Move the [Zoom] lever up or down to select desired option (Series or Reset), then press
the [OK] button.
7. To exit, press the [MENU] button.
Move Select Exit MENU OK ZOOM
√Memory Card
√Super Fine
√Series
Move Select Exit MENU OK ZOOM
M.Cam Mode
√Memory
Memory Type
Photo Quality
File No.
Series
Reset
4
6
M.Cam Mode
Back
Memory Type
Photo Quality
File No.