Playback – Samsung digital SC-D363 User Manual
Page 62
ENGLISH
58
58
Playback
Playing Back a Tape You have recorded on the LCD Screen
✤ The Playback function and speaker works only in
✤ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Insert the tape you wish to view.
➥page 32
4. Open the LCD Screen.
■
Adjust the angle of the LCD Screen and set the brightness or color if necessary.
5. Press the [œ
œœ
œ (REW)] button to rewind the tape to the starting point.
■
To stop rewinding, press the [
■ (STOP)] button.
■
The Camcorder stops automatically after rewinding is complete.
6. Press the [√
√/
■■ (PLAY/STILL)] button to start playback.
■
You can view the picture you recorded on the LCD Screen.
■
To stop the play operation, press the [
■ (STOP)] button.
Adjusting the LCD Bright/LCD Color during Playback
✤ You can adjust the LCD Bright/LCD Color during playback.
✤ The adjustment method is the same procedure as used in
Adjusting the Volume
✤ When you use the LCD Screen for playback, you can hear recorded sound from the built-
in Speaker.
- Take the following steps to lower the volume or mute the sound while playing a tape on
the Camcorder.
✤ When sound is heard once the tape is in play, use the [Zoom] lever to adjust the volume.
■
A volume level display will appear on the LCD Screen.
■
Levels may be adjusted from anywhere between <00> to <19>.
■
If you close the LCD Screen while playing, you will not hear sound from the speaker.
✤ When the AV cable is connected to the Camcorder, you cannot hear sound from the Built-
In Speaker and cannot adjust the volume.
✤ Volume control is disabled while PB Zoom is in use.
5 6
60min
0:46:00:11
†
…
SP
√
[05]