Sun Microsystems X4150 - Manual (Page 52)

42 Sun Fire X4150 Server Installation Guide • May 2009
f. Press Enter on the terminal device to establish a connection between the
terminal device and the LOM service processor (SP).
The following prompt appears.
->
3. Use a pencil, or other pointed object, to press and release the recessed Power
button on the server front panel.
When main power is applied to the server, the Power/OK LED next to the Power
button lights and remains lit.
4. To display a screen for configuring the preinstalled Solaris OS from the system
management port, do one of the following
ELOM:
a. Type: cd /SP/AgentInfo
b. Type: start Console
ILOM:
Type: start/SP/Console
5. Install and configure the software, as required.
Note – Do one of the following from the serial console:
ELOM : To switch back to the Embedded LOM command-line interface from the
serial console, press Esc + Shift + 9, or press Esc ( , depending on your
keyboard location.
ILOM
: To switch back to the ILOM command-line interface from the serial console,
press Esc ( , depending on your keyboard location.