Sun Microsystems X4150 - Manual (Page 46)

36 Sun Fire X4150 Server Installation Guide • May 2009
Note – If you connect to the serial port on the LOM before it has been powered on
or during its power-on sequence, SP boot messages may be displayed.
The LOM displays a login prompt, after a short wait.
login:
7. Type the default user name root, and then type the default password
changeme to log in to the LOM SP.
The LOM displays a default command prompt, indicating that you have
successfully logged in:
- >
8. Type the command show /SP/network to display the current SP IP address.
ELOM : The IP information appears, as shown in the following sample:
ILOM : The IP information appears, as shown in the following sample:
9. Be sure to record the IP address assigned to the LOM.
/SP/network
Targets:
Properties:
MACaddress = 00:1B:24:1D:E6:26
IPAddress = 129.148.53.158
Netmask = 255.255.255.0
Gateway = 129.148.53.248
DNS = 0.0.0.0
IPSource = dhcp
Hostname = SUNSP001B241DE626
/SP/network
Targets:
commitpending = (Cannot show property)
ipaddress = 129.148.53.128
ipdiscovery = static
ipgateway = 129.148.53.248
ipnetmask = 255.255.255.0
macaddress = 00:1E:68:0F:4A:84
pendingipaddress = 129.148.53.128
pendingipdiscovery = static
pendingipgateway = 129.148.53.248
pendingipnetmask = 255.255.255.0