Sony CMD-Z100 - Manual (Page 86)

86
Activating phone services (OTASP) [F84]
You can use the OTASP (Over-The-Air Service
Provision) activation feature to self-activate
your phone with a new service. Contact your
service provider to see if this service is
available in your area.
1 Turn to select “Activation” from
the Network menu, then push .
The Activation menu appears.
2 Turn to select which system
block to activate the service on,
then push
.
A message appears, prompting you for
confirmation. To go back one step, press
CLR
. To cancel activation and return to
the standby display, press END .
3 Press 1 to confirm.
The phone calls up a service provider.
When a service provider is contacted,
you will be connected to an operator.
When activation is complete, the message
“Activation is complete!” appears,
followed by the standby display.
If activation fails
The message “Activation has failed” appears.
Push
to retry, or press END to return to the
standby display.
CM-Z100/69-86final 3/3/98, 9:46 AM 86