Sony CMD-Z100 - Manual (Page 73)

73
Advanced F
eatur
es
You can restrict unauthorized access to your
phone and the information it holds. Also, on
the Security menu, you can reset menu settings
to default and store emergency numbers.
Unlike other items on the Features menu,
accessing the Security menu requires a lock
code when you select it from the menu. A
typical default lock code is either the last four
digits of your phone number or 0000.
Preventing others from using your
phone [F61]
This option lets you set when the phone will be
locked. When the phone is locked, carrying out
most operations requires entering the lock code;
you can still answer incoming calls and dial 911
or other stored emergency numbers.
1 Push to select “Lock Phone”
from the Security menu.
The Lock Phone menu appears.
2 Turn to select when the phone
will be locked.
You can select “never,” “on power-up,”
or “right now.” If you select “never,” the
phone is available for use at any time
without a lock code. If you select “on
power-up,” the phone is locked every
time you turn it on.
3 Push to enter the new setting.
The standby display reappears. The
message “ :Unlock” indicates that the
phone is locked.
To unlock the phone
On the standby display, push . When
prompted, enter the lock code.
Setting security options
CM-Z100/69-86final 3/3/98, 9:46 AM 73