Sony CMD-Z100 - Manual (Page 52)

52
To protect a text message
You can lock a message to protect it from
being erased.
1 After reading a message, push .
The Options menu appears.
2 Turn to select “Lock Msg,” then
push .
A message indicates that the message is
now locked.
Note
The phone does not erase locked messages
automatically. When there is not enough memory
for incoming messages, you must erase the
locked messages manually.
To respond to a text message
1 After reading a text message, open
the arm microphone if it is closed.
2 If the arm microphone is open, push
to see the Options menu. Turn
to select “Send,” then push .
The phone dials the callback phone
number which is attached to the
message. If a callback number is not
attached to the message, no call is made
and a message indicates that a callback
number is not available.
CM-Z100/44-68final 3/3/98, 9:44 AM 52