Adjusting the volume – Sony CMD-Z100 User Manual
Page 55
![background image](/manuals/14949/55/background.png)
Advanced F
eatur
es
55
Adjusting the volume
You can adjust the volume of the ringer,
keybeep, and earpiece on the Sounds menu.
In addition, you can select the type of sounds
heard when the phone rings and when you
press buttons. (See page 21 for instructions on
how to reach the Sounds menu.)
Adjusting the ringer volume [F21]
1
Push
to select “Ringer Vol” from
the Sounds menu.
The Ringer Vol. menu appears.
2
Turn
up to raise the ringer
volume, and down to lower it.
You can select from six ringer volume
settings: “off,” “low,” “med.” (medium),
“high,” “escalate,” and “vibration.”
3
Push
to enter the new setting.
The standby display reappears.
If you turn off the ringer volume
The message “–Ringer Off–” is displayed at
the top of the screen when the standby display
appears.
Tips
• If you set the ringer volume to “escalate,” the
telephone rings twice at a low volume, then
once at medium volume, and thereafter at a
high volume.
• If you set the ringer volume to “vibration,” the
telephone emits a vibration instead of an
audible ring.
(continues)
CM-Z100/44-68final
3/3/98, 9:44 AM
55