Sony CMD-Z100 - Manual (Page 21)

21
Getting Started
If you are out of the service area
The out-of-service icon ( ) appears, and the
phone searches for a service signal. If a signal
cannot be found, the phone enters power save
mode. It will “wake up” automatically at
intervals (based on carrier network settings) to
search for a service signal.
Turning the power off
Hold down PWR for about one second.
Using the Jog Dial™ navigator
The Jog Dial™
navigator makes it
easy to navigate from
one menu to another.
Choosing a menu item
To choose a menu item, push the Jog Dial™
navigator in. The flashing arrow ( ) on the
display indicates the item you can select by
pushing
. As illustrated below, if you push
on the standby display, you will go to the
Features menu. If you push again, you
will go to the Message menu.
(Jog Dial™
navigator)
Display
CLR
END
/ /
MESSAGE
15 Voice
5 New Text
5 Old Text FEATURES
Message
Sounds
Timers
F-1
My Phone
12:34P 12/25
:Saved #s
:Features
CM-Z100/11-22final 3/3/98, 9:41 AM 21