Sony CMD-Z100 - Manual (Page 23)

23
Basic Oper
ations
Making calls
You can call any number
up to 32 digits from
within a service area. The
out-of-service icon ( )
indicates that you are
outside the service area.
1 Use the number buttons to enter
the number.
If you enter the wrong digit, press CLR
to back up. To clear all entered digits,
press
END or hold down CLR to return to
the standby display.
2 If the arm microphone is closed, open
it to dial. If the arm microphone is
open, press
SEND to dial.
The phone dials the number you have
entered. The icon appears.
When the call is connected, the call timer
appears and displays the elapsed time.
3 Press END or close the arm
microphone to end the call when
you are finished.
The icon disappears and the final
elapsed call time flashes for 10 seconds.
The standby display automatically
reappears.
0 OPER - 9 YZ WX ,
/
SEND
END
CLR
Arm mic
CM-Z100/23-26final 3/3/98, 9:42 AM 23