Sony CMD-Z100 - Manual (Page 58)

58
Setting the ringer type [F25]
You can set the type of beep that sounds for
an incoming call.
1 Turn to select “Ringer Type” from
the Sounds menu, then push .
The Ringer Type menu appears.
2 Turn to select the ringer type.
You can select from five different ringer
settings. The ringer sounds every time
you turn
.
3 Push to enter the new setting.
The standby display reappears.
Setting the keybeep type [F26]
You can set the beep that sounds when you
press a button to either a tone or a click. Tones
sound similar to DTMF tones, and clicks are
indicated by single beeps.
1 Turn to select “Key Sound” from
the Sounds menu, then push .
The Key Sound menu appears.
2 Turn to select the keybeep type.
You can select “tones” or “clicks.”
3 Push to enter the new setting.
The standby display reappears.
Note
DTMF tones are sent to the other party during a
call even if you set the keybeep type to “clicks.”
CM-Z100/44-68final 3/3/98, 9:44 AM 58