Sony CMD-Z100 - Manual (Page 44)

44
About the Features menu
You can use the Features menu to activate the
special features of your phone. For a list of
submenus and settings, see “List of menu
items” on page 90.
Viewing and selecting menu options
The Jog Dial™ navigator makes it easy to
navigate the phone’s menus. The procedure to
view and select menu options is common to
most of the Features menus (see page 21).
These menus are accessible during a call also.
The following example shows how to set the
backlight.
1 On the standby display, push to
select “Features”.
If the standby display is not shown,
press
END or hold down CLR , then push
to display the Features menu. The
arrow and the menu number flash,
indicating which menu will be selected
by pushing
.
2 Turn to select “Display,” then
push .
The Display menu appears. The arrow
and the last digit of the submenu
number flash, indicating which submenu
will be selected by pushing
.
3 Turn to select “Backlight,” then
push .
The Backlight menu appears. The current
setting is indicated by a check mark (✓)
and is displayed in capital letters. (See
page 79 for an additional description on
setting the backlight.)
CM-Z100/44-68final 3/3/98, 9:44 AM 44