Sony CMD-Z100 - Manual (Page 60)

60
Checking and setting the timers
You can check call durations on the Timers
menu. In addition, you can set the phone to
alert you every minute of a call, and make the
phone turn itself off automatically.
Checking the duration of all calls [F31]
You can view the total duration of all calls.
This information cannot be reset.
1 Turn to select “All Calls” from
the Timers menu, then push .
The All Calls display appears.
2 Push to go back to the standby
display.
Checking and resetting the duration
of recent calls [F32]
You can view the total duration of the most
recent calls.
1 Turn to select “Recent Calls” from
the Timers menu, then push .
The Recent Calls display appears.
2 Press 1 to reset, or hold down CLR
to go back to the standby display.
If you choose to reset, the counter of
recent calls and the corresponding
durations are reset.
Setting the minute alert [F33]
You can set the phone to alert you ten seconds
before every full minute.
1 Turn to select “Minute Alert” from
the Timers menu, then push .
The Minute Alert menu appears.
CM-Z100/44-68final 3/3/98, 9:44 AM 60