Samsung ML 7300N - Manual (Page 56)

U
SING
O
PERATOR
P
ANEL
3.21
To reset PortThru
1 Press On Line/Continue. OFFLINE appears on the display.
2 Press Menu until NETWORK MENU appears on the display.
3 Press Item until RESET NIC appears on the display.
4 Press Enter and READY appears on the display.
To configure network settings for PortThru.
1 Press On Line/Continue. OFFLINE appears on the display.
2 Press Menu until NETWORK MENU appears on the display.
3 Press Item until CFG NET appears on the display.
4 Press Value until YES appears on the display.
5 Press Enter and you can configure the following network settings now.
6
Skip this step if you don’t want to configure TCP/IP. Press Item until
TCP/IP appears on the display.
a Press Value until ON appears on the display.
b Press Enter and PortThru can use TCP/IP
for communicating.
c Press Item until CFG TCP appears on the display.
d Press Value until YES appears on the display.
e Press Enter and you can select the IP address assign
ment method.
f Press Item until the IP address assignment method
you want appears on the display.
g Select the YES by pressing the Value button.
h Press Enter.
i Skip this step if you don’t select CFG ADRS as the IP address
assignment method. Enter the IP address,
Subnet mask, Default gateway by using Item,
Value and Enter buttons.
NETWORK MENU
Resetting PortThru
Configuring Network setting for PortThru