Samsung ML 7300N - Manual (Page 44)

U
SING
O
PERATOR
P
ANEL
3.9
Use the CONFIG MENU to configure a variety of printer features.
EMUL
PWR SAVE
AUTO (Factory Default)
PCL
PS3
HEXDUMP
You can select the emulation for printing a document.
AUTOCONT
ON (Factory Default)
OFF
The AUTOCONT setting determines whether the printer
continues printing after it detects paper mismatch.
If an error occurs and AUTOCONT is set to OFF,
the printer stops and waits for operator intervention.
If the Continue button on the operator panel is pressed,
the printer continues printing regardless of paper mis-
match. When AUTOCONT is set to ON, the printer auto-
matically resumes processing.
120
15
30 (Factory Default)
45
60
The PWR SAVE menu item lets you reduce power
usage when the printer is idle. The PWR SAVE setting
determines the length of time (in minutes) the printer
waits after a job is printed before it goes to a reduced
power state.
CONFIG MENU
Item Values and Functions