Samsung ML 7300N - Manual (Page 113)

P
ROBLEM
S
OLVING
7.10
PS(PostScript) Problems
1 Open the Properties of PS driver.
2 Click on PostScript.
3 Click on the Advanced button.
4 The pure binary data is not supported.
Choose the others.
The Error messages
(This job contains
binary data...) are
printed.
1 Open the PS driver Properties.
2 Set ‘Optional Tray 2’ item of Device Option to
installed.
The Optional Tray2 is
not selected in PS
driver.
Network Problems
There are two methods.
• On the printer front panel, you can set IP
address in Network Menu. You can find the
following menu.
”NETWORK MENU ➜ CFG NET ➜ TCP/IP ➜
CFG TCP ➜ CFG ADRS”
You cannot see any of
DHCP server, BOOTP
server or RARP server,
when you want to set IP
address to print server.
Problem Solution
Problem Solution