Samsung ML 7300N - Manual (Page 142)

The instructions to install PCL Printer Driver, PostScript
Driver are same. Take the following steps:
1 Insert the first diskette (if the selected software diskettes
are more than one) which contains the desired
installation software; PCL Printer Driver, PostScript Driver.
2 From the Start menu, select Run.
3 Type A:\setup.exe in the Open box and click OK.
(if your floppy drive is not A, substitute the correct
letter).
4 Follow the on-screen instructions to complete the
installation.
7 If you have more than one disk, insert the next disk and
click Yes. Repeat this step for a third disk if necessary.
8 When the diskettes have finished copying, click Close in
the Copy to Floppy dialog box. Then click Exit in the
SAMSUNG PRINTER SETUP dialog box.
Installing Software from Diskettes
Making Installation Diskettes
I
NSTALLING
S
OFTWARE FROM
D
ISKETTES
E.3