Samsung ML 7300N - Manual (Page 55)

U
SING
O
PERATOR
P
ANEL
3.20
CFG NWAR
AUTO
EN-8023
EN-II
EN-8022
EN-SNAP
YES
NO
This menu item lets you configure IPX/SPX configuration
parameters.
UPDATE YES
NO
You need to set the server that provides the upgrade file.
You can set it to UNIX or WINDOWS. After setting the server
for update, you should reset the printer. The upgrade process
will be completed.
FACTORY
DEFAULT
You can reconfigure the PortThru card to the factory default
value for each menu item. After selecting this menu, make
sure that you reset printer.
PRINT NET CFG
Select this menu item to print configuration pages.
BOOT SVR
UNIX
WINDOWS
If you want to upgarde in UNIX System, please select UNIX.
You have to store the file to be upgraded in temporary
directory of UNIX system and configure MAC address,
IP address, the file name and the file path in bootptab file. If
you want to upgrade in WINDOWS System, please select
WINDOWS. You have to enter the IP address of Windows’s PC
that has the upgrade file.
ON
OFF
These items are the frame type for IPX/SPX protocol.
You can select one of these. If you don’t set any value,
Auto(default value) which switches the frame types
automatically is used.
NETWORK MENU
Item Values and Functions