Samsung ML 7300N - Manual (Page 146)

P
RINTER
O
PTIONS
F.3
Closing The Printer Cover
When you have finished installing an Option, follow these steps.
1 Close the metal plate and tighten
all the screws.
2 Set the bottom of the cover onto
the printer. Make sure the bottom
tabs on the cover fit into the
corresponding slots in the printer.
Rotate the cover up towards the
printer. Slide the cover toward the
front of the printer until it clicks
into place.
3 Gently tighten all the screws.
4 Reconnect any interface cables and the power cord.