SATO DR300 User Manual

Page 45

DR300 Operator Manual

4) Count up 10 place of code with key and set with key.

(With key, +1 count up from 0 to f is displayed)

5) Cursor moves to 1 place after set.

6) Count up 1 place with key and set with key.

7) After setting STX, advance to ETX setting. Hereafter, each code is set

accordingly to the same procedures for STX setting.

8) Display returns to top of service mode, after setting.

*Code data for the time of factory is default

STX : 7 b h
ETX : 7 d h
ESC : 5 e h
ENQ : 4 0 h
CAN : 2 l h

CODE ADJ
STX : 7 B

CODE ADJ
ETX : 7 D

SERVICE
LVL SET

Chapter 8 - Operation Panel