SATO DR300 User Manual
Page 28
DR300 Operator Manual
26
CHAPTER 5
Power Supply
Setting Power Supply
Plug in power cable to main body socket then the outlet socket.
Supply Power
Turn power switch on. Push the switch on the side labelled [-].
When the power is switched on, initial startup message [Manual Print Mode] is displayed
on the touch screen.
Switch off Power Switch
The following must be done before power off:
• Confirm printer is not in action (idling).
• Stop or pause any printing process before power off.
Do not operate power switch or plug in / out power cable with wet hands to avoid
electrocution.
Chapter 5 - Power Supply