SATO DR300 - Manual (Page 25)

DR300 Operator Manual
23
Cutter Replacement
Replace cutter unit when blade becomes blunt and cut edges are rough. (Please contact
the sales outlet where you purchase the DR300.)
• Paper thickness 0.1 mm – 0.26 mm
• Accuracy of cuts is ± 1.5 mm
• Paper pitch 25 – 181 mm
• ± 1 mm from perforation is non-cut area
Stacker Option
Stacker
• Set Stacker in front of the cover of the printer main body as shown in the
following drawing.
• Attach the stacker to the front cover of the printer main body as shown in the
arrow direction.
Stacker
Chapter 4 - Setting of Label and Carbon Ribbon