Sharp UX-CD600 User Manual
Page 80
Remote Operations
78
4
While the messages are playing, you can do any of the following:
•
Repeat: To listen to a message a second time, press
and
on the
telephone before that message ends. To move back to the previous
message, press
and
during the first 3 seconds of the current
message.
•
Skip forward: To skip forward to the next message, press
and
on the telephone.
•
Stop: To stop playback, press
and
on the telephone. After this,
you can enter any of the commands described in the following section,
Other remote operations.
•
Play new messages: To listen to only your new messages, first stop
playback by pressing
and
, and then press
and
.
•
Erase a message: To erase the message you are currently listening to,
press
and
before it ends.
5
When you have finished listening to your messages, you can do any of
the following:
•
Erase all messages: Press , ,
and .
•
Repeat playback: Press
and
.
•
Perform other operations: You can enter any of the commands described
in the following section,
Other remote operations.
•
Hang up: If you do not erase your messages first, they will be saved and
any new messages will be recorded after them. If you want the machine to
resume normal operation immediately, press
twice before hanging up
(in some cases, particularly when the Transfer function is used, the
machine may not accept new calls for one or two minutes after you hang up
unless you press
twice).
2
2
5
6
3
3
3
7
all.book 78 ページ ２００４年６月２２日 火曜日 午後１２時１分