Sharp UX-CD600 - Manual (Page 61)

Making Phone Calls at the Machine
59
2. Cordless
Handset
Making Phone Calls at the Machine
You can make and receive calls using the machine’s handset or the
speakerphone.
♦
If calls come in on both lines simultaneously and you answer with the
machine’s handset, the call that came in first will be answered.
Making a phone call
1
Pick up the handset or press .
2
If the display at right appears, press
to select line 1 or to select
line 2.
(If the display at right does not appear,
go directly to Step 3.)
3
Wait until you hear the dial tone and then dial the number.
•
If you pressed , speak toward “MIC” on the operation panel to talk
with the other party.
4
When you are ready to end the call, replace the handset. If you used the
speakerphone, press to hang up.
SPEAKER
SPEAKER
SPEAKER
WHICH LINE?
PRESS 1 OR 2
The above display will appear
if the dialing line setting is set
to MANUAL (page 36) and the
line 2 invalid setting is set to
NO (page 37).
Putting a call on hold
To put the other party on hold during a phone conversation, press .
When this is done, they cannot hear you. You can put the handset back in the
cradle without breaking the connection. When you are ready to speak with the
other party again, pick up the handset. If you did not put the handset back in
the cradle, press again to resume conversation.
PLAY/
HOLD
PLAY/
HOLD
all.book 59 ページ ２００４年６月２２日 火曜日 午後１２時１分