Sharp UX-CD600 - Manual (Page 66)

Setting a Passcode for a Personal Box
64
3
Press once.
4
Press to set a passcode.
(To clear a previously set passcode,
press .)
5
Enter the number of the personal box
for which you wish to set a passcode.
Example: for Box 1
(If you are clearing a passcode, enter
the number of the box and go to Step
7.)
6
Enter a 3-digit number for the passcode. The first digit of the number
must be 0 or 9.
7
Press .
8
Return to Step 5 to set another passcode, or press to return to
the date and time display.
START/MEMORY
STOP
BOX PASSCODE
1=SET, 2=CLEAR
ENTER BOX # (1-8)
1=BOX-1
ENTER PASSCODE
1DIGIT: 0,9
ENTER BOX # (1-8)
1=BOX-1
Note: If you wish to change a passcode, clear the passcode and then enter a
new passcode. If you forget a passcode, clear it and enter a new passcode.
all.book 64 ページ ２００４年６月２２日 火曜日 午後１２時１分