Sharp UX-CD600 - Manual (Page 24)

Setting Up
22
When the battery needs charging, LOW BATTERY will appear in the display
and you will hear beeps during a phone conversation. If you need to continue
the conversation, transfer the call to the machine or another cordless handset
(see page 56). Place the cordless handset in the charger and let it charge.
Note: If the battery is extremely low, nothing may appear in the display during
the first several minutes that the cordless handset is in the charger. The
battery will begin to charge normally after several minutes.
Reinforced concrete Metal Aluminum sash
Talking range
The talking range of the cordless handset may decrease depending on
transmission conditions. If you hear noise or interference while talking on the
cordless handset, move closer to the machine.
♦
When outside the talking range, HANDSET? will appear in the display. If
you move out of the talking range while talking on the cordless handset,
your call will be disconnected. Move closer to the machine and then press
to restore communication with the machine (“HANDSET?” will be
cleared and the normal standby display will appear).
TALK
Large metal objects,
metal structures, and
thick walls reduce the
talking range.
To ensure that the battery
charges properly, wipe the
charger contacts once a
month with a cotton swab.
Important:
Place the cordless handset away from the machine. If placed too close to the
machine, the cordless handset may not ring correctly and phone calls may be
cut off.
all.book 22 ページ ２００４年６月２２日 火曜日 午後１２時１分