Sharp UX-CD600 - Manual (Page 72)

Optional Answering System Settings
70
1
Press once and once.
2
Press once.
3
Press once.
4
Press a number from 1 to 4 to select the desired ICM recording time.
: 15 seconds : 30 seconds
: 60 seconds : 4 minutes
5
Press to return to the date and time display.
FUNCTION
STOP
Optional Answering System Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you in
the answering system. The answering system is set at the factory to allow
each caller a maximum of 4 minutes to leave a message. If desired, you can
change this setting to 15, 30, or 60 seconds.
The display briefly shows
your selection, then:
Fax reception on TAD failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
TAD FAILURE setting is used to select whether or not the machine will switch
to automatic fax reception when this happens:
♦
Automatic fax reception YES: The machine will receive faxes automatically.
With this setting, you can still use the remote commands to listen to your
messages and then erase them (see
Remote Operations on page 76).
Display:
T.A.D. SETTING
RECORDING TIME
REMOTE CODE
RECORDING TIME
1=15 SECONDS
all.book 70 ページ ２００４年６月２２日 火曜日 午後１２時１分